What Is The Procedures To Clean Feeding Tube

Gastrostomy Feeding Tube Care: Flushing

With gastrostomy tube feeding, y'all need to keep the tube from getting chock-full by flushing it with warm water subsequently each feeding and before and after giving whatsoever medicines.

There are unlike types of gastrostomy feeding tubes. One blazon has a connection that lets you plug or push the syringe into the feeding tube port. A newer blazon has a twist-on rubber connector. The twist-on condom connector ways yous must apply a specific blazon of syringe that twists onto your feeding tube port. Check with your intendance squad to brand sure you lot are following the steps for your specific type of gastrostomy tube.

Plug-in syringe and tube

Twist-on syringe and tube

For continuous feeding

Affluent the feeding tube with warm water and a clean syringe before the beginning daily feeding, after the terminal daily feeding, and other times as instructed. Follow the steps below:

• Fill a clean bowl with warm water.

• Put the tip of the syringe in the water.

• Draw up 50 cc of water.

• Turn off the pump.

• Close the clench on the feeding bag tubing.

• Remove the tubing from the port.

• Put the tip of the syringe in the feeding port.

  • Plug-in port. If yous have a plug-in feeding tube port, push the tip of the syringe into the feeding tube port.

  • Twist-on port. If yous have a twist-on feeding tube port, screw the syringe tip onto your feeding port.

• Push button the plunger down.

• Let the water run through the feeding tube.

• Kickoff the feeding or shut the cap on the feeding port.

• Tape the tube to the skin with medical record.

Plug-in syringe and tube

Twist-on syringe and tube

For bolus feeding

You may be told to affluent the feeding tube before and after each feeding, or just later feedings. Utilize a clean syringe and warm water. Follow the steps below:

• Make full a clean basin with warm h2o.

• Put the tip of the syringe in the h2o.

• Draw up l cc of water (tap water is OK to use).

• Open the cap on the feeding port.

• Put the tip of the syringe in the feeding port.

  • Plug-in port. If you have a plug-in type feeding tube port, button the tip of the syringe into the feeding tube port.

  • Twist-on port. If you have a twist-on feeding tube port, screw the syringe tip onto your feeding port.

• Push down on the plunger. Let the water run through the tube.

• Close the cap.

• Tape the tube to the skin with medical tape.

Source: https://www.saintlukeskc.org/health-library/gastrostomy-feeding-tube-care-flushing

Posted by: whitmorethemeavoking.blogspot.com

Share this post